The 034Motorsport Motorsport TrackSport Engine Mount Pair for the B9/B9.5 Audi S4/S5/SQ5, RS4/RS5, & 4M/4M.5 Q7 with the CREC EA837 or EA839 engines are the new standard in ultra-high performance mount solutions. These mounts are designed with extreme performance in mind, manufactured from billet aluminum and high-durometer Density Line rubber, making them virtually indestructible, while maintaining better ride characteristics than polyurethane alternatives, and are meant for applications which see loads beyond what the factory cast aluminum engine mount housings can tolerate.

Due to the significant increase in NVH, 034Motorsport does not recommend these for a daily driver vehicle. These extreme-duty TrackSport Engine Mount Pair will cause significant increases in NVH and rattles in your cabin. They are recommended for use on racecars, as they are designed to create little to no engine movement. These mounts have a lifetime guarantee regardless of the power level applied and the type of track racing they are used for.

Motorsport Mounts are void-free and fluid-free, eliminating the slop associated with the factory engine/transmission mounts, drastically reducing slop from the factory mounting system to improve launches, throttle response, and shift quality. The 034Motorsport Motorsport TrackSport Engine Mount Pair utilizes a dual bushing design. This allows the motor mounts to evenly distribute high load across the mount for long term reliability and maximum performance capability.

High-Durometer Rubber Vs. Polyurethane:
Density Line Mounts are manufactured from high-durometer rubber instead of polyurethane for a number of reasons. While vulcanized rubber mounts are more expensive to prototype due to increased complexity of manufacturing and high initial tooling costs, rubber is inherently better than polyurethane as a damping medium for mounts and bushings.

Rubber is able to deal with stress under both tension and compression, while polyurethane mounts rely on the damping medium to be effective only under compression. Rubber is also excellent in shear, where polyurethane is ineffective, making it ideal for applications that apply a shear force to the bushing during articulation. Rubber does not pack and wear like polyurethane does, which ultimately results in a long-lasting part with consistent performance.

Buyer's Guide for EA839 3.0/2.9 V6 Engines:
The following guide is designed to help customers choose which mount best meets their specific needs.

• "OE" Density Line Mounts
  • Stock to Stage 2+ Power Levels
  • Car is daily driven and/or weekend warrior
  • Slighly Reduced Drivetrain Movement & Improved Reliability
• Street Density Line
  • Stock to Stage 3 Power Levels
  • Car is daily driven and/or weekend warrior
  • Moderately Reduced Drivetrain Movement & Increased Reliability and Performance
• StreetSport
  • Power levels including Stage 1, 2, 3, and beyond
  • Car is frequently launched or taken to HPDE or Drag events
  • Significantly Reduced Drivetrain Movement & Significant Performance and Reliability Improvements
• TrackSport
  • Stage 3 Power Levels & Beyond!
  • Car is heavily launched at drag strips or only used for track events Not Recommended for Daily Use
  • Next to No Drivetrain Movement & Significant Performance and Reliability Improvements

OE Part Interchange:

• Driver Side:
  • 4M0 199 371 D
  • 4M0 199 371 FG
• Passenger Side:
  • 4M0 199 372 D
  • 4M0 199 372 FG

Lifetime Warranty:

Limited Lifetime Replacement Warranty against failure from manufacturing defects. (Applicable to the original purchaser only. If any part of the mount fails under normal use, upon 034Motorsport approval, replacement part(s) will be shipped at no charge to the customer for installation.)


Features:

• Manufactured from Billet Aluminum & 50 Durometer Density Line Rubber
• Extreme-Duty for the Most Punishing Racing and Extreme Performance Applications
• Anodized for Durability and Long Lasting Good Looks
• Reduced Drivetrain Slop
• Decreased Engine Movement Under Load
• More Direct Power Transfer
• Improved Shifting Feel
• Harder Launches
• Virtually Indestructible
• Improved Strength & Durability from Cast Factory Engine Mounts
• Complete Drop-In Replacement of Factory Engine Mounts
• Sold in Pairs
• Active Mount Resistor Bypasses Sold Separately!

Install Instructions:

• For Instructions CLICK HERE

Fitments:

• Audi A4 B9/B9.5 2.0 TFSI 2017+
• Audi A5 B9/B9.5 2.0 TFSI 2018+
• Audi allroad B9/B9.5 2.0 TFSI 2017+
• Audi Q7 4M/4M.5 3.0 TFSI 2015+
• Audi RS5 B9/B9.5 2.9 TFSI 2018+
• Audi S4 B9/B9.5 3.0 TFSI 2018+
• Audi S5 B9/B9.5 3.0 TFSI 2018+
• Audi SQ5 B9/B9.5 3.0 TFSI