ENJOY 0% FINANCING - BUY NOW PAY LATER
.jpeg?q=90&p=thumb&w=200&h=200)
.jpeg?q=90&p=thumb&w=40&h=40)
Brakes 
Driveline 
Electronics 
Handlebars & Controls 
Package Deals 
Wheel Accessories 
Wheels by Vehicle 
Tools and Maintenance 
Universal & Repair 
Vivid Racing Gear 
Bull Strap 4 Layer Quad Wrap Suspension Limit Strap With 4130 Chromoly Heat Treated End Pieces - Made In USA By Bartact. Race Proven By Best In Class Off-Road Racers For Over 14 Years!
At Bartact and Bull Strap, We Use Only Heat-Treated 4130 Chromoly End Pieces And 100 percent Made In USA Mil-Spec Resin Treated 7,000 Lb Nylon Webbing In A Full Quad Wrap Configuration, So You Have 2 Full Layers Around Each Buckle.
We Don't Skimp On Quality...Ever! Made From 4 Layers Of 7,000 Lb Webbing (28,000 Lb Strength Total, But Load Limit Due To Thread Stress Is Approximately 14,500 Breaking Strength)
With Heavy Duty Enamel-Coated Heat-Treated 4130 Chromoly Hardware, And High Grade Nylon Thread, Bull Strap Limit Straps Are Made To Last And To Hold Up Much Better Than Flimsy Single Or Sound Layer Straps With Hardware Not Even Half The Strength. Beware!
Other Made In China Straps Have Copied Our Stamp With The 4130 Heat Treated, But Those End Pieces Break At Roughly 5,500 Lbs. Ours Buckles Are Rated For Over 12,500 Lbs, But Consistently Hold Up To Over 15,000 Lbs In Testing Before Breaking.
Features:
We Make Sure To Use Top-Rated Hardware And Webbing, And Refuse To Use The Cheap Stuff...So You Can Say Goodbye To Your Cheap Limit Straps And Upgrade To Ours.
When Ordering, Length Of Strap Is Distance Between Center Of Hole To Center Of Hole. Nylon Is Meant To Stretch Slightly To Keep A Smoother Transition. Strap Stretch Depends On Multiple Variables, Including Weight, Wet Conditions, Etc., But On Most Applications, You Should Factor Roughly An Inch Of Stretch For Every Foot Of Strap.
Bull Strap and Bartact Are Both Registered Trademarks Under Trek Armor Inc.
At Bartact and Bull Strap, We Use Only Heat-Treated 4130 Chromoly End Pieces And 100 percent Made In USA Mil-Spec Resin Treated 7,000 Lb Nylon Webbing In A Full Quad Wrap Configuration, So You Have 2 Full Layers Around Each Buckle.
We Don't Skimp On Quality...Ever! Made From 4 Layers Of 7,000 Lb Webbing (28,000 Lb Strength Total, But Load Limit Due To Thread Stress Is Approximately 14,500 Breaking Strength)
With Heavy Duty Enamel-Coated Heat-Treated 4130 Chromoly Hardware, And High Grade Nylon Thread, Bull Strap Limit Straps Are Made To Last And To Hold Up Much Better Than Flimsy Single Or Sound Layer Straps With Hardware Not Even Half The Strength. Beware!
Other Made In China Straps Have Copied Our Stamp With The 4130 Heat Treated, But Those End Pieces Break At Roughly 5,500 Lbs. Ours Buckles Are Rated For Over 12,500 Lbs, But Consistently Hold Up To Over 15,000 Lbs In Testing Before Breaking.
Features:
- 31 Inch Strap
- Black with Logo
- Available In Multiple Lengths For Your Desired Application
- 4 Layers Of 7,000 Lb 1-3/4 inch Made In USA Mil-Spec, Resin-Coated, Twisted Yarn Nylon Webbing - 4 Layers!!!
- 12,500 Lb Enamel Coated Heat-Treated 4130 Chromoly End Pieces With Protective Deflector Sleeve And 9/19 inch Bolt Hole
- High Quality Thread And Stitching
- Made In USA
We Make Sure To Use Top-Rated Hardware And Webbing, And Refuse To Use The Cheap Stuff...So You Can Say Goodbye To Your Cheap Limit Straps And Upgrade To Ours.
When Ordering, Length Of Strap Is Distance Between Center Of Hole To Center Of Hole. Nylon Is Meant To Stretch Slightly To Keep A Smoother Transition. Strap Stretch Depends On Multiple Variables, Including Weight, Wet Conditions, Etc., But On Most Applications, You Should Factor Roughly An Inch Of Stretch For Every Foot Of Strap.
Bull Strap and Bartact Are Both Registered Trademarks Under Trek Armor Inc.
Proposition 65
⚠ WARNING:
Cancer and Reproductive Harm
https://www.P65Warnings.ca.gov
What is Bartact?
Bartact has years of manufacturing and design experience under its belt combined with a passion to bring original products to the market. That combination has helped Bartact propel itself as a leader in seat covers, grab handles, and other accessories for Jeep and Toyota. Bartact’s Jeep Wrangler, Gladiator, and Toyota Tacoma seat covers are proudly made in the USA using only the finest materials.
Bartact is not only dedicated to top quality; it also strives to be cutting-edge innovators that craft all of their products right here in the U.S. The company’s years of experience, both commercially and by the U.S. Military under its other corporate umbrellas, has granted Bartact an up-close view of the need for innovation.
Quality from the Start
Bartact initially entered the retail market when it introduced the Trek Armor line at the SEMA Show in Las Vegas in 2011. At that time, the brand had already received input from military personnel, commercial trucks, outdoorsmen, off-roaders, and several U.S. suppliers over a three-year period. This was done to guarantee that Bartact was building the most rugged and versatile seat covers, accessory bags, and grab handles available, while also ensuring that all parts were user-friendly and could adapt to everyone’s needs.
Find Bartact Parts at Vivid Racing
Vivid Racing carries a wide selection of Bartact parts, including bags, cage accessories, extinguisher mounts, hand tools, seat covers, towing accessories, off-road jacks, console covers, and much more! If you have any questions regarding the products listed above, please do not hesitate to call our trained sales professionals at (480) 966-3040.
Check out these other great products
Error: Failed to add product
Please refresh the page and try again.