The all-new 2020 Shelby GT500 is the most powerful and fastest street-legal Ford in history and the most advanced Mustang ever produced for the street, track, and drag strip. It’s the pinnacle of any pony car engineered by Ford Performance to this day, both delivering on its heritage and boasting the most high-performance technology to date. The Shelby GT500 is powered by a 5.2-liter engine that is the most power- and torque-dense supercharged V8 in the world. Paired to an ultra-quick Tremec 7-speed dual-clutch transmission, this beast has a power output of 760 horsepower and 625 pound-feet of torque. This allows the GT500 to go from 0-100-0 in 10.6 seconds, treating drivers to a visceral experience that is typically reserved for exotic supercars.
Shop Anderson Composites Here
The 2020 Ford Mustang Shelby GT500 was expertly engineered with an aero-led design that increases downforce and thermal management. While this Mustang needs no help in the aesthetics department, there is always room for improvement and the aftermarket houses some quality parts that can really elevate and accentuate the natural race-driven DNA of the GT500 – namely from Anderson Composites. Anderson Composites specializes in fiberglass and carbon fiber components for late-model domestic makes and models with a world-renowned reputation for delivering a harmonious balance of form and function. They manufacture each and every one of their products with the utmost attention to detail and only use top-grade materials for a quality product you can trust.
Anderson Composites’ lineup of parts for the 2020+ Ford Mustang GT500 is quite impressive and includes everything from front splitters to side skirts, mud guards, spoilers, hoods, and more! Their extensive manufacturing experience and cutting-edge production process make the possibilities endless when it comes to making products that offer the perfect combination of styling, performance, and reliability. Its carbon fiber parts for the GT500 are lightweight and durable, and boast a show-ready, high-luster finish. These products are manufactured using 3K 2×2 twill weave carbon fiber and Anderson Composites’ proprietary vacuum infusion process. Resin is then introduced into the molds as a liquid to produce a high-gloss wet-look finish that is made to last. Check out the list of products available for your Mustang GT500 below!
2020-2021 Mustang Shelby GT500 Carbon Fiber Side Splitters (GET IT HERE!)
- Carbon fiber side splitter extensions for 2020 Ford Mustang Shelby GT500 (Pair)
- Fits Shelby GT500 Only (does not fit GT350)
- Replaces OE Shelby GT500 rocker panel splitter extensions
- Note: Does not include rocker panel splitters (sold separately)
2020-2021 Mustang Shelby GT500 Carbon Fiber Side Skirts (GET IT HERE!)
- Replaces OE Shelby GT500 rocker panel splitters
- Mounts using OE hardware
- Does not include side splitter extensions (sold separately)
- Does not include four (4) replacement 1/4″ x 1/2″ rivets (drill and rivet tool required)
- Mounting tabs may require modifications for correct fitment; minor adjustments may be necessary as part of the normal installation process
- Additional clips and hardware may be required to optimize installation
2020-2021 Mustang Shelby GT500 Carbon Fiber Rear Splash Guards (GET IT HERE!)
- Carbon fiber rear mud guards for 2020 Ford Mustang Shelby GT500 (Pair)
- Fits Shelby GT500 models only
- Replaces OE Shelby GT500 rear splash guards
- Duplicate of OE part, DOES NOT extend beyond OE design
2020-2021 Mustang Shelby GT500 Carbon Fiber Rear Diffuser (GET IT HERE!)
- Carbon fiber rear diffuser for 2020 Ford Mustang Shelby GT500
- Fits Shelby GT500 models only
- Mounting tabs may require modifications for correct fitment; minor adjustments may be necessary as part of the normal installation process
- Rear bumper needs to be removed for proper installation
- Additional clips and hardware may be required to optimize installation
2020-2021 Mustang Shelby GT500 Double-Sided Carbon Fiber Hood (GET IT HERE!)
- Type-OE double-sided carbon fiber hood for 2020 Ford Mustang Shelby GT500
- Does not include hood vent; Heatshield required
- Mounts with OE hardware, OE latch and OE hinges
- Carbon fiber hood (A side) bonded to carbon fiber “skeleton” (B side)
- Requires OE hood pins (not included, transfer OE pins from OE hood to CF hood)
- Anderson Composites does not suggest re-installing OE gas strut
- The use of a hood prop rod is highly recommended
- Handcrafted; approximate weight 22 lbs. (OE hood weighs 43 lbs.)
2020-2021 Mustang Shelby GT500 Carbon Fiber Gurney Flap (GET IT HERE!)
- Fits OE GT500 base model rear spoiler and Anderson Composites carbon fiber rear spoiler
- Does not include rear spoiler
- Mounts with OE T20 (long) fasteners
2020-2021 Mustang Shelby GT500 OE Carbon Fiber Rear Spoiler (GET IT HERE!)
- Direct replacement for GT500 base model rear wing
- Does not include Gurney Flap (sold separately)
- Fits 15-20 Mustang coupe (uses OE Mustang GT wing mounting hole pattern)
- Fits 15-20 Shelby GT350 with OE Track Pack spoiler
- Does not fit convertible Mustang
- Handcrafted; approximate weight 6.0 lbs.
2020-2021 Mustang Shelby GT500 Carbon Fiber Front Splitter Wickers (GET IT HERE!)
- Carbon fiber front splitter wickers for 2020 Mustang Shelby GT500
- Mounting holes may require modifications for correct fitment; minor adjustments may be necessary as part of the normal installation process
- Direct replacements for 2020 GT500 with CFTP Package or 2020 GT500 Base Model with Handling Package (reuse OEM hardware)
- Do not fit GT350 or GT350R
Click Here To View All Anderson Composites Mustang GT500 Parts.
If you have any questions, please do not hesitate to contact us. You can reach us by phone at 1-480-966-3040 or via email at sales@vividracing.com.
