Modern day aftermarket ECU tuning are pushing powerful engines harder. In certain conditions, cars will run the risk of receiving inadequately cooled air affecting the engines efficiency and ultimately losing power
With this in mind, Forge Motorsport is proud to release the PolarCooler, as the first auxiliary cooling system for the Audi RS6 and RS7 (C7 platform) on the market.
Following extensive testing on the road and dyno working with three different manufacturers of water core, Forge is proud to present the ultimate in frontal water cooling solutions. You can find the below products and more right here in our Forge Motorsport inventory.
- Forge Motorsport Silicone Boost hoses for Audi RS6 C7 (MSRP $70)
- Charge Cooler Radiator for the Audi RS6 C7 and Audi RS7 (MSRP $1,800)
- Pair of Forge Motorsport Recirculating/Atmospheric valves for the Audi RS6 C7 (MSRP $375)
- Washer Bottle Cover/Windscreen Washer Reservoir cap for Audi (MSRP $50)
- Alloy Water and Oil caps for Audi filler cap and header tank (MSRP $120)
Forge PolarCooler Features:
- An increase of over 100% extra capacity using a 22 fpi ( fins per inch ) louvre super tech cooling core for maximum cooling.
- The PolarCooler retains the OEM charge cooler radiator but flows into a front mounted extra auxiliary radiator that is front mounted.
- This design means it has no obstructions i.e. the condenser to affect its efficiency and performance .It is not placed directly in front of the coolant radiator and is last in sequence.
- This unique design has allowed inlet temperatures to be lowered by 20 degrees C (68 degrees F) in 3 back to back consecutive runs on the dyno.
- With the Forge PolarCooler the standard bleed point is retained on the OEM radiator.
- The Forge PolarCooler has no extra header tank as the OEM system utilises a one way valve within the system that only opens if the water level drops e.g. taking in water when it evaporates
- All of the Forge coolant hoses have been designed to include an expensive inner liner of modified silicone known as Flurosilicone.
- This liner means that the hoses are suitable for use with modern long-life coolants, Organic Acid Technology coolants (O.A.T.) and oil mist. The use of a Flurosilicone liner ensures that Forge silicone hoses are the best, longest lasting, and preferred choice of the discerning car enthusiasts.
- The construction of the hoses has been engineered to exceed that of the OEM fitments, and will enhance any engine bay both technically and aesthetically.
- The Forge PolarCooler comes complete with all the necessary hardware including an OEM modified crash bar and Forge silicon hoses to complete the installation, along with anti-corrosion black powder coat on the hand fabricated end tanks and crash bar.