4 Interest FREE Payments with Affirm - View Here
1-480-966-3040
Mon-Fri 8am to 5pm AZ
Loading...
See more parts for Ford F-150
Select the year of your Ford F-150:
Looking to do a Raptor coilover or complete suspension conversion on your standard F-150'ere's the first step allowing you to run the bigger ⌀, longer length coilovers with our Camburg conversion weld-in coil buckets.
This conversion is for the skilled do it yourselfer or a qualified off-road shop to take on since you'll be cutting, fitting, grinding and welding these onto the factory frame. The Ford frames through the years vary every so slightly so some minor fitting is involved. Their manufacturing tolerances are no where near what we keep. These were designed to be welded in and we do not recommend trying to bolt them in. The holes are for proper placement and to allow the upper control arms bolts to tie into further gusseting the frame and making it stronger. When you're all said and done and you've given it a coat of black Steel-It, you would think it was factory.
These are designed to be used with aftermarket Ford Raptor '17-20 (GEN2) coilovers from FOX (non-Live Valve), King & Icon or the OEM '17-18 non-Live Valve coilovers. Depending on your suspension parts setup, you may need to install limit straps to not allow the suspension to droop too far and put something into a bind. With the increase in wheel travel, we recommend our Camburg uniball upper arms (either F-150 or Raptor depending on the extent of your conversion).
What's included:
This conversion is for the skilled do it yourselfer or a qualified off-road shop to take on since you'll be cutting, fitting, grinding and welding these onto the factory frame. The Ford frames through the years vary every so slightly so some minor fitting is involved. Their manufacturing tolerances are no where near what we keep. These were designed to be welded in and we do not recommend trying to bolt them in. The holes are for proper placement and to allow the upper control arms bolts to tie into further gusseting the frame and making it stronger. When you're all said and done and you've given it a coat of black Steel-It, you would think it was factory.
These are designed to be used with aftermarket Ford Raptor '17-20 (GEN2) coilovers from FOX (non-Live Valve), King & Icon or the OEM '17-18 non-Live Valve coilovers. Depending on your suspension parts setup, you may need to install limit straps to not allow the suspension to droop too far and put something into a bind. With the increase in wheel travel, we recommend our Camburg uniball upper arms (either F-150 or Raptor depending on the extent of your conversion).
What's included:
- Driver side weld-on coil bucket
- Passenger side weld-on coil bucket
- Ford F-150 4wd 2015-2020
- Cutting/grinding/welding on the frame is required to install these parts. These are to be installed by a skilled person or by a qualified off-road shop.
Proposition 65
⚠ WARNING:
Cancer and Reproductive Harm
https://www.P65Warnings.ca.gov
Make Vehicle | Model | Year |
---|---|---|
2015-2020 Ford F-150 |
F-150 | 2015-2020 |
We're currently collecting product reviews for this item. In the meantime, here are some company reviews from our past customers sharing their overall shopping experience.
Newest to Oldest
- Highest to Lowest
- Newest to Oldest
- Favorite Reviews
All Ratings
- All Ratings
- 5 ★ Reviews
- 4 ★ Reviews
- 3 ★ Reviews
- 2 ★ Reviews
- 1 ★ Reviews
×
Only 50 characters left to turn your standard review into a featured review!
Write a Review
Camburg CAM-110215 Raptor Conversion Coil Bucket Kit Ford F-150 2015-2020
How would you rate this product?
It appears from your ratings that you may have an issue that needs attention. If you left a 1 or 2-Star rating by mistake, please correct it before continuing. Or, if your rating is correct, please leave us some feedback so that we can better serve you.
Continue to feedback.
No thanks. I would rather not participate in rating.
Continue to feedback.
No thanks. I would rather not participate in rating.
Write a short headline:
*Write a review about this product:
Please enter your contact information below:
Please don't put an email in the name field. address.
Please enter a valid email address.
Your email is safe.It will onlybe used for order confirmation and customer care.
Please fix above errors.
Paul W.Verified Customer
12-24-24 - Arizona, United States
Doug R.Verified Customer
12-24-24 - Tennessee, United States
- 1
- 2
- 3
- 4
- 5
Check out these other great products
Error: Failed to add product
Please refresh the page and try again.