Save Up to 60% Off on Wheels, Suspension, Exhausts, and More - VIEW DEALS
- Browse
- Newest Items
- CLEARANCE DEALS
- Air Intakes
- Brakes
- Body | Aero Parts
- Driveline
- ECU Tuning
- Electronics
- Engine
- Exhaust Parts
- Exterior
- Fuel Components
- Gauges
- Handlebars & Controls
- Interior
- Lighting
- OEM Parts
- Package Deals
- Racing Gear & Apparel
- Suspension
- Turbo | Supercharger
- Tires
- Wheel Accessories
- Wheels by Size
- Wheels by Vehicle
- Tools and Maintenance
- Universal & Repair
- Vivid Racing Gear
Carbing Aluminum Rear Tower Bar Type R Lexus IS200 SXE10 | IS300 JCE10 1998-2005
Select the year of your Lexus IS200:
Features:
- To make hight rigidity by using oval shaft.
- Strut Tower Bar is a standard item for body reinforcement. It will stabilize suspension?s behavior by preventing body from twisting at cornering. This is particularly effective with old models. Fitting a Strut Tower Bar to front section of a car will improve steering response, and also improve controllability of the car when fitted at the rear section as rear section?s behavior becomes more recognizable. Installations of these are easy, prices are reasonable, and most of all enhance your car?s appearance.
- Shaft and brackets are welded together to optimize the force distribution for maximum rigidity.
- CARBING strut bars are fully welded, creating extremely high rigidity and reducing weight. Every single product is welded by our skilled and experienced welders by hand. As a result, the beautiful weld line finish shows our commitment to the best quality.
- Brackets use 4mm thick base plate for material strength.
- Carbing tower bar brackets use 4mm thick base plate for enough strength and rigidity. It is designed to fit perfectly to the vehicle strut tower bar top without any gap between the for each application to eliminate any play from vehicle vibration.
- Possible to control the extreme force owing to make some force release points daringly.
- Okuyama (Carbing) product welding has some force release points that are determined by experience. This non complete welding releases stress caused by various driving conditions that may cause any accidents like cracks. Owing to our force release points, the damage to the one side is reduced if there is any hit on the other side.
- Type R
- Uses a 2-point support, 30 x 50 large diameter shaft. 20 to 30% higher rigidity than standard. (Compared to our company)
- About a bolt joint.
- Bar and the installation bases are separated due to installation difficulties and space limitations. Most conventional products use only one bolt design. It does not hold all the forces Strut tower bar is supposed to hold in a primary purpose since the joints allows up and down movements. Okuyama spirit for the best performance added bolt to make two bolts design to brace the joints as strong as welded construction models. (except for some models)
- Role of a Master Cylinder Stopper.
- Master Cylinder Stopper regulates the unwanted movement of itself during driving. This results in better feel and touch of the brake pedal. Master Cylinder Stopper is best suited for the drivier wanting to have quick and direct control of brake.
- Lexus IS200 SXE10 | IS300 JCE10 1998-2005
Other Part Numbers:
Carbing #CA 663 019 0
⚠ WARNING:
Cancer and Reproductive Harm
https://www.P65Warnings.ca.gov
Make Vehicle | Model | Submodel | Year | Engine | Notes |
---|---|---|---|---|---|
1999-2005 Lexus IS200 |
IS200 | 1999-2005 | |||
2001-2005 Lexus IS300 |
IS300 | 2001-2005 |
Check out these other great products
Help Me Decide
One of our experts would be happy to help you navigate these options and get the exact part you need. We can contact you via phone or email.