AEM s 380lph High Flow, High Pressure Fuel Pump is capable of supporting over 1,200 HP normally aspirated and a whopping 860 HP at 30 psi boost! It flows 380 lph (100 gph) at 43 PSI, 340 lph (90 gph) at 73 PSI, and 270 lph (71 gph) at 120 PSI. Complete flow curves from 35 to 120 PSI and current draw vs. fuel pressure charts are available in the specs tab.
The AEM 380lph High Flow Fuel Pump is designed for use with gasoline. Alcohol fuels can be used, but pump life will be diminished. The inlet thread is a -10 AN female ORB (O-ring port fitting) and the discharge is a female -6 AN ORB (O-ring port fitting).
A male -6 to -8 AN discharge fitting with integral high pressure check valve, terminal nuts, terminal boots and installation instructions are included. Optional accessories that are sold separately include a -10 ORB fitting inlet pre-filter (for use with in-tank installations), and both -8 and -6 discharge adapters without integral check valves. Accessory fittings are hard anodized.
Features:
- Designed for high output naturally aspirated and forced induction EFI vehicles
- Popular "044 Style physical configuration but with AN inlet & discharge port connections
- Maintains very high flow even at boosted fuel pressures; 340 lph @ 73 PSI (30 psi boost)
- Installs externally or in-tank
- Each pump individually tested to flow minimum of 380lph (100gph) @ 43 PSI
- For gasoline vehicles (pump life will be diminished when used with alcohol fuels)
- Kit includes fuel pump, -6 to -8 male AN discharge fitting with check valve, terminal nuts & boots, instructions
- Weight: 12.5oz (354grams)
- Outside Diameter: 60mm OD
- External Materials: Black plated steel with laser etching, with zamac discharge end cap
- Inlet Fitting: -10AN 7/8"-14 Female
- Outlet Fitting: -6AN 9/16"-18 Female
- PRV Activation: 150 PSI
- Impeller Design: Roller vane with ceramic end plate
- To see size chart CLICK HERE
- Connector Terminal: 6mm stud positive, 5mm stud negative
- Min Voltage Input: 10 volts
- Max Voltage Input: 18 volts
- Current Draw (40 psi): 9.73 amps no check valve, 10.68 amps with check valve (13.5v)
- Current Draw (120 psi): 16.07 amps no check valve, 17.13 amps with check valve (13.5v)
- Power rating given using gasoline and assuming a base fuel pressure of 43 PSI, 13.5v at the pump, 6.2 lbs/gal with a BSFC of 0.65. Boost fuel pressure is assumed to be the base pressure of 43 PSI + boost pressure. Flow capability for horsepower support is ultimately dependent on fuel hose diameter, and system electrical voltage and amperage capabilities.
- Optional Inline High Flow Fuel Pump Accessories: 50-200-06: -6AN Discharge Fitting, 50-200-08: -6AN to -8AN Discharge Fitting with Integral Check Valve, 50-200-10: -10AN Inlet Port Fitting,50-200-11: -10AN Inlet Port Filter, 50-200-86: -6AN to -8AN Discharge Fitting
⚠ WARNING:
Cancer and Reproductive Harm
https://www.P65Warnings.ca.gov
History of AEM Electronics
AEM Electronics has been a pioneer in the automotive performance industry since its inception in 1987. Founded by a group of automotive enthusiasts, AEM quickly gained recognition for its innovative approach to performance parts. The brand initially focused on air intake systems, but as the demand for high-quality performance components grew, AEM expanded its product offerings to include a wide range of electronic tuning solutions, fuel management systems, and exhaust systems. Over the years, AEM has established itself as a trusted name among car enthusiasts and professional racers alike.
Categories of Parts Offered by AEM ElectronicsAEM Electronics specializes in a variety of performance parts designed to enhance your vehicle's power, efficiency, and overall driving experience. Their product categories include:
- Cold Air Intakes: AEM's cold air intake systems are engineered to increase airflow and improve engine performance, giving your vehicle the power boost it craves.
- ECU Tuning: AEM offers advanced engine management systems that allow for precise tuning, ensuring your vehicle runs at its optimal performance.
- Fuel Management: With AEM's fuel delivery systems, you can achieve the perfect air-fuel ratio for maximum efficiency and power.
- Exhaust Systems: AEM's exhaust solutions are designed to reduce back pressure and enhance exhaust flow, resulting in improved horsepower and torque.
What sets AEM Electronics apart from other brands in the automotive performance industry is their unwavering commitment to quality and innovation. Each product is meticulously engineered and tested to ensure it meets the highest standards of performance and reliability. AEM's dedication to customer satisfaction is evident in their extensive research and development efforts, which continually push the boundaries of automotive technology. Furthermore, AEM's products are backed by a solid warranty and exceptional customer support, making them the go-to choice for car enthusiasts looking to elevate their vehicle's performance.
In conclusion, AEM Electronics is not just a brand; it's a legacy of performance and innovation. Whether you're a weekend warrior or a professional racer, AEM offers the parts you need to take your vehicle to the next level.