Save up to 30% With Code SUMMER24 See Details
Add instant horsepower and torque with an aggressive sound to your MK5 GTI & Jetta and MK6 Golf R 2.0T FSI with the IE Cold Air Intake Kit. Our velocity stack intake features perfect MAF scaling, improved throttle response, and loud turbo noise that will keep you smiling every time you hit the throttle.
This cold air intake kit is designed as a direct bolt-on kit for many Volkswagen FSI 2.0T engines such as the MK6 Golf R, MK5 GTI/Jetta/GLI and Audi 8P A3 engines. Check the fitment section for a complete list of confirmed vehicles by year.
Features:
This cold air intake kit is designed as a direct bolt-on kit for many Volkswagen FSI 2.0T engines such as the MK6 Golf R, MK5 GTI/Jetta/GLI and Audi 8P A3 engines. Check the fitment section for a complete list of confirmed vehicles by year.
Features:
- Perfect Maf Scaling
- Specialty Design Details
- High-Flow Velocity Stack
- Increased Flow
- Custom Heat Shield
- Massive 5" Air Filter
- Drop-In Fitment
- Clean Appearance
- Easy Installation
- IE custom sized MAF tubing
- IE 3 inch diameter powder coated inlet pipe
- IE heat shield & massive air filter
- All necessary hardware (clamps, nuts, bolts, etc)
- Audi - A3 2006-2013 (MK2 - 8P) 2.0T FSI
- VW - Golf R 2012-2013 (MK6) 2.0T
- VW - GTI 2006-2009 (MK5) 2.0T FSI
- VW - Jetta & GLI 2006-2010 (MK5) 2.0T FSI
- *This cold air intake kit is for 2.0T FSI timing belt driven engines only, late model 2.0T TSI timing chain driven engines found on the late model (2008.5+)VW GTI and Jetta/GLI require a different intake kit. Please verify if your engine is an FSI or TSI tune before ordering.
Proposition 65
⚠ WARNING:
Cancer and Reproductive Harm
https://www.P65Warnings.ca.gov
| Make Vehicle | Model | Submodel | Year | Engine | Notes |
|---|---|---|---|---|---|
|
2006-2013 Audi A3 |
A3 | 2006-2013 | |||
|
2006-2009 Volkswagen GTI MK5 |
GTI MK5 | 2006-2009 | |||
|
2012-2013 Volkswagen Golf R |
Golf R | 2012-2013 | |||
|
2006-2010 Volkswagen Jetta |
Jetta | 2006-2010 |
Who is Integrated Engineering?
Integrated Engineering was founded in 2007 in Salt Lake City, Utah. It was started by two brothers Peter and David Blais. The two shared the same passion for racing, and this has jumpstarted the two to create Integrated Engineering.
The company specializes in manufacturing performance products such as rods, camshafts, valve trains, and Billett accessories. Today, they have become a household name when it comes to performance.
German Car Experts
Integrated Engineering focuses on producing performance products for Audi and VWs. As the experts in these platforms, they are able to pinpoint exactly what parts need to be improved to bring out the best in those vehicles. The company considers not only the performance gain but its reliability as well. Their goal is to turn these vehicles into a better performing machine without compromising its reliability.
Attention to Detail is the Key
To create top quality products, the company carefully studies each design detail using specialized software. This enables them to fine-tune the design before it goes to actual manufacturing. They first test their design in ABS plastic to ensure that all measurements are accurate and on the spot. Once everything has been checked, their performance products are then tested in their in-house engine and chassis dyno machine for long hours to test its performance and reliability.
This attention to detail has enabled their parts to perform in extreme conditions and withstand the punishment usually endured during high-performance applications.
Purchase Integrated Engineering Products at Vivid Racing
If you want to improve the way your Audi or VW performs, then Integrated Engineering has got you covered. Their expertise in these platforms has made them the go-to brand when it comes to performance, and it has gained them the trust of many enthusiasts everywhere. Visit Vivid Racing and see their list of products that would fit your specific needs.
Check out these other great products
Error: Failed to add product
Please refresh the page and try again.