Tomei Poncam 282 11.0mm Exhaust Camshaft Nissan 350Z | Infiniti G35 2003-2008 - TA301E-NS03C

Tomei: A Legacy of Performance

Tomei began operations in 1968 as a race car tuner in Japan. Over the last 40 years, Japan has emerged as one of the leaders in automotive research, racing, and culture. Tomei products have been utilized in nearly every motor sport imaginable. Tomei's racing heritage means their research and design team have first-hand knowledge of the extreme demands racing puts on an engine. Using only the highest quality materials means that Tomei's products can handle the intense strain and heat a purpose-built engine will experience whether it be on the street or the track. Tomei's attention to detail is second to none. All of their products are thoroughly researched and engineered to achieve optimal efficiency. Because even minuscule differences in measurements can cause catastrophic engine failure, all Tomei products fall within strict tolerances. Tomei machines all of their engine components to enhance airflow and ensure proper fitment and seal.

TA301E-NS03C: Upgrade Your Engine

From the factory, an engine is usually equipped with a camshaft that sacrifices low-end torque and top-end power to focus on smooth idle and fuel economy, neither of which are a primary concern in high performance or race applications. Upgrading your camshaft is the single most effective way to change how your engine behaves throughout the RPM range. The camshaft controls the duration, lift, and overlap of the intake and exhaust valves opening. Tomei's Camshafts are designed to help your engine flow more air faster, the basic recipe for Horsepower and Torque. This increased volume is achieved by increasing how long the valves stay open, how far they open, and their overlap. Selecting the proper camshaft for your particular wants, needs, and engine setup allows you to maximize Torque and Horsepower in whatever range is most beneficial for your particular driving or racing style. Tomei Camshafts undergo a vigorous research and development process to maximize horsepower and reliability. All Tomei Camshafts are CNC machined to guarantee a precise fit and proper valve lift/duration.

TA301E-NS03C and Tomei Poncam 282 11.0mm Exhaust Camshaft Nissan 350Z | Infiniti G35 2003-2008

Tomei's Poncam line is designed for drivers who desire an increase in horsepower and torque without sacrificing drivability. Tomei Poncam camshafts are perfect for a daily driven street car. These easy-to-install camshafts are built to suit the stock valve train and ECU, and do not require any additional tuning.

• Engine: VQ35HR
• Application: Z33 MT
• Duration: 282°
• Lift: 11.00 exhaust

• Pictures are for representation only. Actual product may vary.
• Upgrading the Valve Springs is required when using Camshafts with Cam Lift greater than 11.0mm (sold separately).
• When using Camshafts with Cam lift greater than 11.0mm on the intake side, there is a chance that the valves can come into contact with the piston when the eVTC advances the timing. In this case, it is highly recommended to recess the pistons to guarantee adequate clearance. Example: The standard advance amount with the stock head and stock pistons with the eVTC will require approximately 1mm valve recess on the piston.

• Nissan 350Z VQ35HR 2003-2008
• Infiniti G35 2007-2008

For those looking to enhance their performance even further, consider exploring HKS products. HKS, founded in Japan, has also established a reputation for high-quality tuning parts, including turbo systems, exhausts, and intercoolers. Their commitment to performance aligns perfectly with Tomei's philosophy, making them a great complement to your upgrades. Whether you're hitting the track or the streets, HKS and Tomei provide the quality and performance you need to take your vehicle to the next level.

For more information on HKS products, visit HKS USA or check out the latest offerings on Vivid Racing.