Under Bracing
034 Motorsport Front Strut Brace, B8 Audi A4/S4, Allroad, Billet Aluminum
034 Motorsport Front Strut Brace, B9 Audi A4/S4, A5/S5/RS5, Allroad, Billet Aluminum
034 Motorsport MQB Front Subframe Locking Collar Upgrade Kit Audi | Volkswagen Golf | GTI | R 2015+
034 Motorsport Sway Bar End Link, Motorsport, Front, Adjustable Audi B9 A4 | S4| A5 | S5 | RS5 2017-2023
034 Motorsport X-Brace Billet Aluminum Chassis Reinforcement, B8/B8.5 Audi A4/S4/RS4, A5/S5/RS5, Q5/SQ5, Allroad
034 Motorsport X-Brace Stretch Bolt Subframe Hardware Kit for B8 (Pre-Facelift) Models
034 Motorsport X-Brace Stretch Bolt Subframe Hardware Kit for B8.5 (Facelift) Models
034 Motorsports Stainless Steel Subframe Locking Collar Upgrade Kit Audi TT | TTS | TTRS 8J
034Motorsport Front Strut Brace Billet Aluminum Audi C8 A6/S6/RS6/Allroad | A7/S7/RS7 2019-2024
2021-2024 Ford Bronco ADS Adjustable Panhard Bar for 0-3" Lift
AJK Offroad Billet Aluminum Radius Rod Plate w/ Tow Hook Can-Am X3 2015+
What is Chassis Bracing and Why is it Important?
Take two vehicles with the same drivetrain, brakes, suspension and aero. Set the two vehicles to have the same exact final weight and weight balance. If the only difference is the rigidity of the chassis, do you think it's going to make a difference on the race track or the street? Ask any experienced race car manufacturer or even OEM vehicle designer, and the answer will be a definitive "yes." All other factors being equal, the higher the rigidity of the chassis, the faster the car will be around the racetrack. If there is not enough reason to consider improving the rigidity of your project car chassis, consider that vehicle control will also benefit as well as the overall safety of the vehicle.
Consider the MacPherson strut suspension setup: here we have a single control arm with a damper running from the strut to the body. During cornering, a rotating force is applied to the control arm, which is transferred up the strut to its mounting point, effectively pulling down the body of the car. This is known as chassis flex.
It's nothing your car can't handle, but it's seen as unwelcome, making the car less responsive to your inputs than a sharper driver would have liked. By joining the suspension struts at the top mounts with a nice, solid bar, the force is evenly distributed across the two towers, counteracting the flex. After fitting, the car should turn in that little bit sharper, as there will be no delay in the car to react due to the flex.
Why Chassis Stiffness is Important
The chassis is your car’s foundation and every suspension component is attached to it. If your chassis is flexible, your braking and steering ability will not be as responsive. On top of that, total grip is limited with a weak chassis. If you want to maximize your vehicle’s potential, improving chassis stiffness is a must.
When the suspension responds to roughness in the road’s surface like holes, railway tracks, speed bumps, etc. the shock can be transmitted towards the chassis through flex. Preferably, these bumpers should be absorbed by your car’s wheels, shocks, springs, and bushings. However, a portion of the force can be relayed to the chassis. The effect is a wobbling or shuddering car body during a chassis flex.
When you’re driving hard on a canyon road or track, the chassis flex effect can lead to poor handling characteristics which can’t be tuned out with suspension. You may also find your car incapable of driving smoothly in long, wide corners and you will have to correct its position to stay on the correct driving line. In severe instances, the chassis flex can be serious enough to affect your vehicle’s wheel-alignment while under load, dramatically degrading its cornering ability.
This is why it’s very important to stiffen your car’s chassis if you want to maximize its potential. To put it simply, a stiff chassis offers a strong foundation for the suspension to work with. This is turn allows the coils and dampers to function correctly, which results to improved handling and ride quality. This applies to the front and rear of your vehicle.
When Do You Need to Install Chassis Bracing?
Once convinced that increased chassis stiffness is desirable, the next logical step is to explore how to make the chassis more rigid. All today's performance vehicles are built on a unibody design, as opposed to a body-over-frame design that has been used almost exclusively in the 1950s and 1960s. With the unibody, the body or shell of the vehicle functions as the frame and structure of the vehicle. The design of the roof, floor, pillars and accompanying chassis all affect the rigidity of the chassis of the vehicle.
The geometric reality of increased rigidity is usually found in the form of a triangle. The triangle is the simplest, lightest and most rigid frame structure. Examples of triangles make up rigid structures in both nature and construction. Whether the component is a roll bar or a simple strut tower brace, the use of triangle geometry ensures that peak stiffness increases with minimal weight.
Also, it is best to install chassis bracing after you have installed aftermarket suspension and sticky tires. The increase load of sticky tires and the higher spring rates of aftermarket suspension results in significantly more chassis flex compared to a completely stock vehicle. Different types of chassis bracing include strut bars, fender braces, subframe connectors, roll cages, and many more.
Buy online or give one of our world-class professionals a call at 1-480-966-3040.