Remus has developed a brand new performance sport exhaust system for the BMW F87 M2. The new development will not disappoint, with over 25 years of exhaust technology experience and using a highly sophisticated R&D center which features one of Europe's largest acoustic sound chambers, the Remus technicians have been able to improve upon the original exhaust of the 3.0-liter N55B30 turbocharged BMW engine by intergrating 2 electronically controlled valves into the exhaust system. The company's sound experts spend many days isolated in the acoustic sound chamber developing the distinctive sonorous-aggressive roar typical for Remus as heard on many satisfied F8x M3/M4 customer cars around the globe. The team in charge of developing extra power carried out numerous dyno runs in the acoustic chamber and found that the 2 x 65mm dual flow configuration was able to increase power by an impressive 8,7 HP while torque was increased by 11,8 Nm. At the same time, the weight of the stainless steel Remus performance sport exhaust system is reduced by 1,1 kg compared to the original.

The Remus Catback performance sport exhaust features a bolt-on non-resonated front section paired with a bi-modal performance sport exhaust system which comes with full EC approval and features 2 intergrated valves which are controlled by the onboard vehicle electronics. The exhaust comes as a 4x 100mm quad tip configuration and with 5 different tip set designs. All Remus performance sport exhaust systems are produced using T304 stainless steel and are shot-blasted to relieve possible production induced material stresses. The lighter-weight construction is partly down to thinner, yet equally strong side wall construction. The aggressive Remus sound generated from the N55B30 turbocharged engine is due to innovative bi-modal internals with up to 80% reduced back pressure which is directly responsible for the noticeable power increase. All internals are also made from T304 stainless steel which are corrosion resistant and guarantee long term quality. All Remus performance sport exhaust systems are covered by a 3 year warranty against manufacturer defects.

Features:

• Catback system L/R (without tail pipes) with integrated valves, incl. EEC homologation
• Original tube - 80 mm | Remus tube 2x65 mm
• No cutting of the original exhaust system required
• The system includes an additional original BMW actuator and a Y-cable for connecting both actuators with the onboard electronics of the vehicle.
• View DYNO Chart Here
• Exhaust Tip Options:
  • 0046 70SG: Stainless steel tail pipe set L/R consisting of 4 tail pipe Ø 102 mm angled, straight cut, chromed, with adjustable spherical clamp connection.
  • 0046 70S: Stainless steel tail pipe set L/R consisting of 4 tail pipe Ø 102 mm angled, chromed, with adjustable spherical clamp connection
  • 0046 70CS: Tail pipe set L/R consisting of 4 Carbon tail pipe Ø 102 mm angled, Titanium internals, with adjustable spherical clamp connection
  • 0046 98C: Stainless steel tail pipe set L/R consisting of 4 tail pi Ø 98 mm Street Race, with adjustable spherical clamp connection
  • 0046 98CB: Stainless steel tail pipe set L/R consisting of 4 tail pi Ø 98 mm Street Race Black Chrome, with adjustable spherical clamp connection

Fitment:

• BMW M2 F87 2016-2021