See all Fuel Components products

Siemens Deka 60 LB High Impedance Fuel Injectors EV1: Square Plug/Jetronic: Standard Length - 107961

Siemens Deka 60 LB High Impedance Fuel Injectors EV1: Square Plug/Jetronic: Standard Length - 107961 - Image 3

Siemens Deka 60 LB High Impedance Fuel Injectors EV1: Square Plug/Jetronic: Standard Length

$49.95

Add to Wishlist

Model#107961
ManufacturerSiemens

Have a Question?

Live Chat (480) 966 3040

BEST PRICES, AMAZING SERVICE

Description
Reviews

These injectors flow 60 lbs/hr at 43.5 PSI ( 3 BAR ) and up to 85 lbs/hr at 87 PSI! In addition, these units are high-impedance. Despite the high flow rate, they are linear and controllable at low pulse widths and have been used in ULEV applications! This allows you to use a larger injector than normally possible without hurting idle and low speed driveability. Adding to the flexibility of application, these units are high-impedance; making them compatible with most ECUs, while delivering the most flow available in a High-Impedance injector.

These injectors are able to function at high fuel pressures and don?t exhibit the high fuel pressure handling problems found with many other high flow high-impedance injectors. This makes these injectors very well suited to turbocharged and supercharged applications that see high fuel system pressures.

Engine performance and running quality are enhanced through the optimized spray pattern. Unlike competitors "pencil stream" high flow injectors; these High Flow injectors utilize a multi-orifice tip providing a true 30 degree spray pattern for improved mixture preparation. This results in lower BSFC and better idle quality than many injectors with less flow.

Features:

Genuine, reliable Siemens Injectors
Excellent response characteristics
Robust Design
High Impedance
Low Impedance performance characteristics with High Impedance Compatibility

Specifications:

Coil Resistance: 12.5 Ohms / High Impedance / High-Z (No ECM driver modifications required)
Static Flow Rate @ 43.5PSI ( 300kPa ) w/Gas: 60 lb/hr = 630 cc/min = 453 g/min
Static Flow Rate @ 87PSI ( 600kPa ) w/Gas: 85.7 lb/hr = 900 cc/min = 648 g/min
Gain: 0.11ms/mg
Offset: 0.055ms
Turn on time @ 14VDC: 1.14ms
Turn off time: 0.85ms @ 600KPa
Connector: USCAR EV6
Series: DEKA 4 ( DEKA IV )
Orifice Type: Multi-orifice
Spray Pattern: 30 Degree Spray Cone
Factory fitted with Viton upper and lower o-rings

Fitment:

These are standard length 60mm (top o-ring to bottom o-ring) please check vehicle requirements or call before ordering.

Note:

ECU Tuning May be Required if running larger injectors
Sold individually

Proposition 65

⚠ WARNING: Cancer and Reproductive Harm
https://www.P65Warnings.ca.gov

We're currently collecting product reviews for this item. In the meantime, here are some company reviews from our past customers sharing their overall shopping experience.