Spohn Bright Red Tubular Rear Upper Control Arm w/ Polyurethane Bushings Chevrolet B-Body 1965-1966

Replace the factory's weak and flexible rubber bushed rear upper control arm on your 1965-1970 Chevrolet B-Body Impala, Caprice, Biscayne, Bel Air, etc. Our tubular rear upper control arm provides for serious handling performance and greatly increase the rear end's fore and aft stability.

After more than 45 years of use the factory rear upper control arm is corroded and the rubber bushings are cracked and dry rotted which adversely effects the performance of your car.

Improve your ride quality, reduce body roll, eliminate wheel hop and increase traction with an easy bolt on installation. All ends are fitted with grease fittings for easy lubrication of the fluted polyurethane bushings.

Specifications:

• 1.25" x .120" wall DOM tubing.
• Stronger, yet lighter than stock.
• Polyurethane bushings (fluted) with grease fittings for easy lubrication.
• Reuses OEM mounting hardware, no need to drill out your mounting brackets.
• 100% bolt in installation.
• Available powder coated in your choice of the above colors for a brilliant and durable finish.

• Chevrolet B-Body Chevrolet Impala | Biscayne | Bel Air | Caprice | Kingswood | Townsman | Brookwood 1965-1966

• Priced per Arm - Qty. 1 = 1 Arm: You will need to verify whether your car has one or two rear upper control arms. All six cylinder and most small block cars were equipped with one rear upper control arm. Big block cars were equipped with two rear upper control arms.
• Fitment Notes: Fits Chevrolet B-Body cars only. Specify your vehicle year of 1965-1966 or 1967-1970 in the option box above as the rear upper control arm lengths were different for those two year ranges.