.jpeg?q=90&p=thumb&w=200&h=200)
.jpeg?q=90&p=thumb&w=40&h=40)
Brakes 
Driveline 
Electronics 
Handlebars & Controls 
Package Deals 
Wheel Accessories 
Wheels by Vehicle 
Tools and Maintenance 
Universal & Repair 
Vivid Racing Gear Select the year of your Ford Expedition:
A cold air intake kit for the Ford F-150 2.7L or 3.5L EcoBoost is one of the first upgrades you should do to your truck. The twin turbocharged engine that powers the F-150 and the Raptor will benefit from the improved intake design giving you an overall better driving experience. The VR Performance cold air intake kit gives your EcoBoost better throttle response, allows the turbochargers to spool up quicker, as well as increase torque along with horsepower throughout the entire RPM range. As you go through the 10 speed transmission, you will hear the turbochargers spool up as they take in a much larger volume of air. When the driver is not heavy on the throttle, you can even expect a slight improvement to your MPG. As tested on a stock 2018 Ford Raptor running 91 octane while using our Mustang Dynamometer, the intake made a peak gain of 10 rear wheel horsepower (rwhp) while maintaining a midrange of 12rwhp. Torque jumped up 20ft/lbs over stock giving you more power off the line and when you need it most!
Vivid Racing's intake design and manufacturing is all done here in the USA. The custom high flow cone filter has a large diameter flange taking in air from 360 degrees around. The box design has been engineered to integrate with the factory air snorkel. The air filter is sealed off from hot engine air with a rubber gasket that is mounted to the one piece box. Connecting the air filter to the two turbochargers is a one piece, roto molded intake tube that splits off with a clean seamless merge. With this design, the VR intake tube flows over 100% more air than the stock intake tube. The intake is finished off with an integrated sensor mount, Vivid Racing silicone couplers, and required hose clamps.
Why Stock Intake is Weak:
A factory intake box can have restrictions from the stock air filter and intake tubes. Looking at the stock intake of the Ford F-150 EcoBoost, you will notice the corrugated tubes that connect the hard piping to the filter box. This design can cause turbulence to the air flow. When the air flow is disrupted, this affects performance as the air speed is slowed down. While air flow is very important, so is the amount of air that can be sucked into the turbochargers compressors. The stock intake features a flat panel filter design which is common in most vehicles. These paper air filters are non-reusable and do not have the best flow or surface area needed to gain performance.
Features:
- Lightweight Roto molded Plastic Construction
- Designed as an OEM Replacement
- High Flow and Reusable Cone Air Filter
- Intake Tube Flows Over 100% More than Stock
- Gain over 10HP and 20ft/lbs of Torque
Fitment:
- 17-21 3.5L Raptor
- 15-20 F-150 3.5L EcoBoost
- 15-20 F-150 2.7L EcoBoost
- 18-20 Expedition 3.5L EcoBoost
- 18-20 Navigator 3.5L EcoBoost
Note:
- View Installation Instructions Here
- Does not require tuning
Other Part Numbers:
VR Performance #151939185
⚠ WARNING:
Cancer and Reproductive Harm
https://www.P65Warnings.ca.gov
| Make Vehicle | Model | Year |
|---|---|---|
|
2018-2019, 2021 Ford Expedition |
Expedition | 2018-2019, 2021 |
|
2015-2022 Ford F-150 |
F-150 | 2015-2022 |
|
2017-2020 Ford Raptor |
Raptor | 2017-2020 |
|
2018-2021 Lincoln Navigator |
Navigator | 2018-2021 |
Welcome to VR Performance: Excellence in Automotive Parts
About VR Performance: A Legacy of Innovation
Established with a passion for high-performance automotive parts, VR Performance has become a household name among car enthusiasts and professionals alike. With a rich history spanning over a decade, the brand has consistently pushed the boundaries of innovation, delivering products that enhance vehicle performance and driving experience. From humble beginnings, VR Performance has evolved into a leader in the automotive aftermarket industry, setting standards for quality and reliability.
Renowned Categories of Parts by VR Performance
VR Performance specializes in a wide range of automotive parts, including but not limited to:
- Performance Exhaust Systems
- High-Performance Air Intakes
- Suspension Upgrades
- Tuning Software and ECU Remapping
- Brake Kits and Components
Each product category is meticulously designed and engineered to meet the needs of performance-driven vehicles. Whether you are looking to enhance horsepower, improve handling, or increase overall efficiency, VR Performance has the right solution for you.
What Makes VR Performance the Best Choice?
What sets VR Performance apart from the competition is their unwavering commitment to quality and customer satisfaction. Each product undergoes rigorous testing to ensure it meets the highest standards of performance and durability. The brand also prides itself on using top-grade materials and advanced manufacturing techniques, ensuring that every part not only performs exceptionally but also lasts longer.
Moreover, VR Performance's dedication to customer support is unparalleled. Their knowledgeable team is always ready to assist you in finding the perfect parts for your vehicle, ensuring a seamless experience from selection to installation.
Join the VR Performance Community
When you choose VR Performance, you are not just purchasing parts; you are joining a community of passionate automotive enthusiasts who value quality and performance. Explore the extensive range of products available on Vivid Racing and elevate your driving experience today!