WCFab Candy Red High Flow Intake Bundle Kit Chevrolet 6.6L LP5 Duramax 2020-2022

  See more parts for Chevrolet Silverado 2500 HD
Select the year of your Chevrolet Silverado 2500 HD:
Product thumb
WCFab Candy Red High Flow Intake Bundle Kit Chevrolet 6.6L LP5 Duramax 2020-2022
$1517.08

Stage 2 upgrade for the 2020-2022 L5P Duramax combines our Stage 1 High Flow Bundle and Stage 2 Intake Kit into a single package providing increased airflow for your turbo and engine for improved efficiency, throttle response, and turbo spool up. Eliminates weak points in the factory design that can contribute to lost power, boost leaks, and complete failures in hard working and high performance applications.

On the air intake side, our high flow fabricated intake pipe, intake horn, and air box enclosure with dry filter assembly replaces the restrictive plastic factory parts on 2020-2022 L5P Duramax Diesel for improved engine performance and sound. Significantly increases airflow to your turbo producing improved horsepower and torque and cooler intake temperatures by drawing cold air through the hood Ram Air duct and inner fender. All aluminum 14 ga. construction features large diameter 4 in. piping with smooth aerodynamic bends. Improves intake air velocity, volume, and provides a more aggressive engine and turbo sound during acceleration. The intake horn is over an inch larger than the OEM diameter.

High quality hardware, silicone boot, seals, and stainless steel t-bolt clamps ensure optimum durability and ease of installation. Removable air box lid element allows for easy visual inspection and maintenance of your WCFab filter with included hydrophobic pre-filter cover, to help keep your MAF sensor, turbo, and engine airways contaminant free.

After the turbo, our Stage 2 kit also upgrades the restricted 2-piece 2.5 in. diameter driver (hot) side intercooler pipe and leak-prone 2-piece plastic / rubber passenger (cold) side pipe with WCFab's heavy duty 3 in. diameter 1-piece Driver (Hot) Side and 3.5 in. diameter Passenger (Cold) Side L5P Intercooler Pipes. Made in the USA from high strength, heavy duty 14 ga. aluminum tube with smooth, aerodynamic mandrel bends for increased durability and optimized flow.

3 in. Driver Side pipe eliminates the OEM middle boot joint for improved flow and durability and includes high quality reinforced silicone boots and stainless t-bolt clamps for superior temperature resistance and boost pressure holding capabilities.

3.5" Passenger Side pipe features a CNC machined flange with a double o-ring seal and an upgraded silicone boot in order to withstand higher boost pressures than the factory components to increase reliability and eliminate blown factory boots and horsepower robbing boost leaks.

Full assembly finished in your choice of WCFab's signature custom powder coat colors for a look as unique as your truck. Installs with basic hand tools. Compatible with stock trucks, no tuning required. Saves $64 vs. buying individually.

Features:

  • 4 in. Aluminum Intake Pipe
  • 3.5 in. Intake Horn with PCV Port and Surge Ring
  • Air box enclosure with dry filter assembly and Outerwears pre-filter cover
  • Installation hardware, 4 in. silicone hump boot and stainless t-bolt clamps
  • 3 in. Hot Side Intercooler Pipe
  • 3.5 in. Cold Side Intercooler Pipe
  • CNC Machined Flange and black anodized billet aluminum adapter with Double O-Rings provides an improved sealing surface to eliminate boost leaks
  • OEM Clip Ring Design at Y-bridge connection replaced by high quality silicone boot and stainless steel t-bolt clamps for improved sealing and ability to hold higher boost pressures without leaking
  • Silicone Boots
  • Stainless Steel T-Bolt Clamps
  • O-Rings
  • Intercooler Outlet Clip
  • Retains factory connection points and sensors
  • NO Tuning required, bolt on!
  • Will fit on stock truck no other modifications or upgrades necessary!
  • Durable Powder Coat Finish
Fitment:
  • Chevrolet 6.6L LP5 Duramax 2020-2022


Other Part Numbers:
Wehrli Custom Fabrication #wcfWCF100414-CR

Proposition 65

WARNING: Cancer and Reproductive Harm
https://www.P65Warnings.ca.gov

Vehicle Engine Notes
2020-2022
Chevrolet Silverado 2500 HD

2020-2022
Chevrolet Silverado 3500 HD

2020-2022
GMC Sierra

Who is Wehrli Custom?

Wehrli Custom is an aftermarket company that was founded back in 2010 in Sandwich, Illinois. Starting in a two-car garage, they developed performance parts aimed towards various motorsport enthusiasts. With their experience around ATVs, dirt bikes, truck racing, and snowmobiles, they saw the opportunity to create parts that would help improve their ride without spending too much.

Today, the company grew to be one of the most recognizable brands in the motorsport industry and is sought after by racers and enthusiasts everywhere.

Quality Made Products

The company creates some of the best products and is known for its high-quality finishes. It is possible thanks to their powder coat shop that includes elevated temperature-resistant ceramic coatings and two curing ovens. They also have a CNC mill and lathes to help create those accurate and precise cuts. 

With the best tools at its disposal, coupled with a team of dedicated enthusiasts, Wehrli Custom could cement its position as one of the leading brands in its segment.

Your High Performance Go Shopping

Wehrli Custom specializes in high-performance diesel upgrades and custom metal fabrication. They offer a variety of parts and upgrades for various diesel engines such as Duramax, Powerstroke, & Cummins Diesel trucks. 

They offer turbo kits and custom performance parts that are custom fabricated and made in the USA. It guarantees that you only get the best products every time,

Purchase Wehrli Custom At Vivid Racing

If you are in the market for high-quality performance parts for your vehicle, then Wehrli customs is the brand for you. To know more about them, visit Vivid Racing and check out their list of products that fit your specific needs.

Check out these other great products