Brakes 
Driveline 
Electronics 
Handlebars & Controls 
Package Deals 
Wheel Accessories 
Wheels by Vehicle 
Tools and Maintenance 
Universal & Repair 
Vivid Racing Gear Select the year of your Kawasaki KRX 1000:
XTC Power Products Leads the way in UTV Wiring. Powering multiple accessories has become easier than ever with our Plug and Play PCS (Power Control System) for the Kawasaki KRX 1000. Unlike other switch systems available, the Power Control System’s designed with the installer in mind. Every PCS has a vehicle specific power connector and rocker switch harness that fits the factory pre-cut rocker switch positions.
Power Delivered
The PCS includes 1 x 30 amp and 3 x 20 amp high current circuits on relays with Diode protection. The design reduces voltage spikes from field collapse, protecting LED lights and other sensitive accessories. There are also 2 x 10 amp direct wire circuits provided for low power accessories like rock lights or whip lights. Additionally included is a fuse block that protects the circuits and comes with an eight gauge power cable and fuses. Most UTV charging systems produce anywhere from 40-70 amps. Because of this, a 50 amp circuit breaker at the battery safely supplies power to the PCS. Installing a 100+ amp high power switch system is not practical in a UTV.
The Power Control Systems Barrier Strip
Pro wiring installers have been using barrier strips in off-road vehicle builds for years. Some good reasons would be aesthetics, along with ease of use when adding new connections and troubleshooting down the road. Each screw point on the barrier strip has a different colored wire that corresponds with the fuse box and switches harness wires. Therefore the 1st rocker switch would be the large 30 amp grey wire, and then so on and so forth.
Kawasaki KRX 1000 Switch System Power Harness Configurations
Designed for the Kawasaki KRX 1000, the PCS-64-KRX-NS switch harness has 6 Rocker Switch Positions in a row that mount in the center dash. Also, the rocker switches can be installed together in any custom way deemed fit by the installer as well. Moreover, a Molex connector links the switch harness to the main Power Control System.
Modular Power Connection
The PCS-64-KRX-NS has a modular power connector at the fuse box that plugs inline with the vehicles ignition power. Consequently, the lower LED (available on custom rocker switches) will only illuminate when the ignition key is turned on. The upper light only comes on when the rocker switch’s pressed. It should be noted that the wiring system will work with or without the vehicle’s ignition power on. XTC Power Products, made in America and Wired For Fun®!
Features:
- Plug and Play Easy Install
- Fits 2020+ Kawasaki KRX 1000 2 & 4 Seater
- 1 x 30 AMP, 3 x 20 AMP High Power Relayed
- and 2 x 10 AMP Direct Switch Circuits
- Fuse Block with Blown Fuse LED Indicator
- Each Switch on Individual Fuse
- 8GA Power Cable 50 AMP Main Circuit Breaker at Battery
- Barrier Strip for Clean Integration
- Bottom Row Lighting when upgraded switches used
- 6 Switch System, Switches Sold Separately
- Made in the USA!
- For Instructions CLICK HERE
- Kawasaki KRX 1000 2 & 4 Seater 2020-2023
⚠ WARNING:
Cancer and Reproductive Harm
https://www.P65Warnings.ca.gov
| Make Vehicle | Model | Year |
|---|---|---|
|
2022-2023 Kawasaki KRX 1000 |
KRX 1000 | 2022-2023 |
|
2020-2021 Kawasaki KRX 1000 - Delete |
KRX 1000 - Delete | 2020-2021 |
XTC is an aftermarket company that specializes in creating a plug-and-play harness for the automotive industry. It started as a small favor by wiring a turn signal to a friend’s vehicle without altering the factory wiring. The company began manufacturing the first plug-and-play turn signal and power control system for the UTV community. It has since become the favorite brand of enthusiasts when it comes to a ready-made wiring harness.
Your Safety Is Their PriorityAdding an extra switch or an extra light to a vehicle may be straightforward. But what others don’t realize is the risk they get from an improperly installed electrical component. When dealing with electricity, it is a must that everything should be safe and done correctly. XTC provides a solution to this by producing a wiring harness that you can easily install to your factory harness without cutting it. It gives a cleaner and safer install.
Your Electrical Component Go-To ShopThe company offers a wide range of products from turn signal systems, power control systems, LED lights, horn kits, switchplates, power adapters, and more. Each is carefully manufactured and tested to ensure that it meets the high standard the company has put in place.
Purchase XTC Products At Vivid RacingAre you scared of doing a wiring job in your vehicle? Worry no more as there is an easy way to do this with XTC products. XTC provides you with products that are easy to use and safe. To know more about XTC, visit Vivid Racing and check out their list of products that fit your specific needs.