ENJOY 0% FINANCING - LEASE TO OWN
Power Delivered: The PCS-72S includes 1x30 amp and 1x20 amp high current circuits on relays with Diode protection. The design reduces voltage spikes from field collapse, protecting LED lights and other sensitive accessories. There are also 3x10 amp direct wire circuits provided for low power accessories like rock lights or whip lights. One Switch's a dedicated Strobe Light System with 2-Channels on a 10 amp fuse. Additionally included is a fuse block that protects the circuits and comes with an eight gauge power cable and fuses. A 50 amp circuit breaker at the battery safely supplies power to the PCS.
The Power Control Systems Barrier Strip: Pro wiring installers have been using barrier strips in off-road vehicle builds for years. Some good reasons would be aesthetics, along with ease of use when adding new connections and troubleshooting down the road. Each screw point on the barrier strip has a different colored wire that corresponds with the fuse box and switches harness wires. Therefore the 1st rocker switch would be the large 30 amp grey wire, and then so on and so forth. Lastly, the purple and yellow wires are the Strobe System circuits and Strobe in a left/right sequence when activated. This feature can be integrated into the vehicle brake light system and other aftermarket accessories.
XTC Strobe System Switch Power Harness Configurations: Designed for Trucks and Jeeps, the PCS-72S has become our most universal Power Control System for switch mounting locations. The switch harness has three rocker switches that mount in the center dash, followed by a single switch mounted right of the steering wheel, and then two more go left of the steering wheel. Also, rocker switches can be installed together in any custom way deemed fit by the installer as well. The Strobe System has 7 different flashing patterns that can be cycled through using the included black mountable switch. Moreover, a Molex connector links the switch harness to the main Power Control System.
Modular Power Connection: The PCS-72S has a modular power connector at the fuse box with +/- ring terminals that connect to ignition power. Consequently, the lower LED (available on custom rocker switches) will only illuminate when the ignition key is turned on. The upper light only comes on when the rocker switch's pressed. It should be noted that the wiring system will work with or without the vehicle's ignition power on.
Features:
- Plug and Play Easy Install
- Fits Trucks and Jeeps-6' Switch Harness
- 6 Switch System W/ 5 Red Lens Bar Actuators & 1 Strobe Rocker
- 2 Channel Strobe Built In-10 AMP Each
- 1x30 and 1x20 AMP High Power Relayed and Three 10 AMP Direct Circuits
- Fuse Block with each Switch on Individual Fuse
- 8GA Power Cable 50 AMP Main Circuit Breaker at Battery
- Screw Terminal Strip for Easy Integration
- Made in the USA!
⚠ WARNING:
Cancer and Reproductive Harm
https://www.P65Warnings.ca.gov
XTC is an aftermarket company that specializes in creating a plug-and-play harness for the automotive industry. It started as a small favor by wiring a turn signal to a friend’s vehicle without altering the factory wiring. The company began manufacturing the first plug-and-play turn signal and power control system for the UTV community. It has since become the favorite brand of enthusiasts when it comes to a ready-made wiring harness.
Your Safety Is Their PriorityAdding an extra switch or an extra light to a vehicle may be straightforward. But what others don’t realize is the risk they get from an improperly installed electrical component. When dealing with electricity, it is a must that everything should be safe and done correctly. XTC provides a solution to this by producing a wiring harness that you can easily install to your factory harness without cutting it. It gives a cleaner and safer install.
Your Electrical Component Go-To ShopThe company offers a wide range of products from turn signal systems, power control systems, LED lights, horn kits, switchplates, power adapters, and more. Each is carefully manufactured and tested to ensure that it meets the high standard the company has put in place.
Purchase XTC Products At Vivid RacingAre you scared of doing a wiring job in your vehicle? Worry no more as there is an easy way to do this with XTC products. XTC provides you with products that are easy to use and safe. To know more about XTC, visit Vivid Racing and check out their list of products that fit your specific needs.
- Highest to Lowest
- Newest to Oldest
- Favorite Reviews
- All Ratings
- 5 ★ Reviews
- 4 ★ Reviews
- 3 ★ Reviews
- 2 ★ Reviews
- 1 ★ Reviews